沂南县5-30万吨棒材生产线 Rod production line of 50,000-300,000 tons
致初心，工业筑起强国路；见行动，匠人精神铸品质！！亲爱的【5-30万吨棒材生产线 Rod production line of 50,000-300,000 tons】客户您好，感谢您浏览河南五冶机械制造有限公司官方企业网站！多年来，将岁月沉淀入产品肌理，河南五冶机械制造有限公司坚持以研发为生存之本，不断地提升新技术在【5-30万吨棒材生产线 Rod production line of 50,000-300,000 tons】产品中的应用！专注细节把控，匠心成就臻品！ 如果您想了解更多的【5-30万吨棒材生产线 Rod production line of 50,000-300,000 tons】产品新技术在实际中的应用情况，请致电河南五冶机械制造有限公司【5-30万吨棒材生产线 Rod production line of 50,000-300,000 tons】技术咨询电话：【13938265594】
，了解更多实用资料！
轧制工序一般由一列(组)或二列(组)粗轧机、中轧机和精轧机组成。分别承担钢坯断面压缩、半成品轧制变形和成品轧制功能。成品轧机孔型或称精轧孔型为K1孔，成品前轧机孔型为K2孔，成品前前轧机孔型为K3孔，以下如此类推。
连续式轧机是指几个轧机机座按轧制方向顺序排成一行，轧件同时在几个轧机内轧制变形，各架轧制速度随着轧件长度的增加而增加，并保持金属在每架轧机中的秒流量相等或有轻微的堆拉钢关系的轧制方式称连续式轧机。连续式轧机具有很高的机械化、自动化、轧制速度和轧制精度，因而劳动生产率高且产品品质优良，是棒、线材轧机改造和新建的方向。保持在单位时间内轧件通过各轧机体积相等的轧制称连轧。
The rolling process generally consists of one or two rows of roughing, middle and finishing mills. The billet section compression, semi-finished product rolling deformation and finished product rolling function. The pass type of the finished mill or finishing rolling is K1 hole, the pass type of the finished front mill is K2 hole, the pass type of the finished front front mill is K3 hole, and so on.
Continuous rolling mill refers to several rolling mill stand in a row according to the rolling direction sequence, rolling deformation in several rolling mills at the same time, the rolling speed of each frame increases with the increase of the length of rolling parts, and keep the metal flow in each mill in the second is equal or there is a slight stacking and drawing steel relationship called continuous rolling mill. Continuous rolling mill has high mechanization, automation, rolling speed and rolling precision, so the labor productivity is high and the product quality is good, it is the direction of rod and wire rolling mill reform and new construction. Continuous rolling is called continuous rolling in which the rolled pieces pass through each mill in equal volume within a unit time.
地址：河南省焦作市温县谷黄路
服务热线：13938265594
手机：13938265594
邮箱：137545002@qq.com