1.设备用途

  本生产线采用连铸连轧的工艺方法，生产电工用普铝、铝合金杆（8×××系列），成品杆径φ9.5mm、φ12mm。

2.简单工艺流程      

2.1工艺流程示意如下：

普铝锭及废铝线→熔化炉→保温炉→四（五）轮式连铸机→前牵引机 →滚剪机→锭坯过渡支撑装置 → 连轧机→二次曲线滚轮式铝杆冷却润滑装置→双框连续绕杆机→无油铝杆。

2.2熔铝或已配好的熔态铝由保温炉经过流槽，注入四（五）轮式连铸机，连续铸成面积为2400mm²的梯形锭。用滚剪剪去废锭，将其前端压小，喂入连轧机出杆，经由双框绕杆机成框。

3.设备组成

机组主要由四（五）轮式浇铸机(整体式)、前牵引机、滚剪机、锭坯过渡支撑装置、连轧机系统、连轧机润滑油系统、连轧机乳液循环系统、二次曲线滚轮式铝杆冷却润滑系统、双工位铝杆成圈装置、连铸连轧机组电气控制系统等组成。

4.主要技术参数  

4.1导电铝杆直径：                Φ9.5mm、Φ12mm

4.2生产能力：                       2.5-5.3t/h

4.3设备总尺寸：            32.05×7.2×4.2m（不包括炉子部份）

4.4设备总重量：                     ∽65t

4.5设备总功率：                     ∽450KW

1. Equipment use

This production line adopts the process of continuous casting and rolling to produce ordinary aluminum and aluminum alloy rods (8××× × series) for electrical purposes. The diameter of the finished rods is φ9.5mm and φ12mm.

2. Simple process flow

2.1 The technological process is shown as follows:

Aluminum ingot and scrap wire → melting furnace → holding furnace → four (five) wheel continuous casting machine → front tractor → roller shears → ingot billet transition support device → continuous rolling mill → quadratic curve roller type aluminum rod cooling and lubricating device → double frame continuous rod winding machine → oil-free aluminum rod.

2.2 The molten aluminum or the prepared molten aluminum is injected into the four (five) wheeled continuous casting machine by the holding furnace through the flow trough to continuously cast into the trapezoidal ingot with an area of 2400mm2. The waste ingot was removed by rolling shear, the front end was pressed down and fed into the rod of the tandem rolling mill, and the frame was formed by the double frame winding machine.

3. Equipment composition

The unit is mainly composed of four (five) wheel casting machine (integral), front tractor, roller shears, ingot billet transition support device, continuous rolling mill system, continuous rolling mill lubricating oil system, continuous rolling mill emulsion circulation system, quadratic curve roller type aluminum rod cooling and lubrication system, double station aluminum rod ring forming device, electric control system of continuous casting and rolling mill.

4. Main technical parameters

4.1 Diameter of conductive aluminum rod: Φ9.5mm, Φ12mm

4.2 Production capacity: 2.5-5.3t/h

4.3 Total equipment size: 32.05×7.2×4.2m (excluding the furnace part)

4.4 Total weight of equipment: ∽65t

4.5 Total Device Power: ∽450KW

     真干，实干，中国梦就在前方！在智造业进入到智能化的今天，工匠精神并不过时，它的本质是自发专心致志地做事。河南五冶机械制造有限公司多年来兢兢业业、心无旁骛，坚守在机械领域，在电工用圆铝杆连铸连轧生产线 Round aluminum rod continuous casting and rolling production line for electrical purposes等产品上一点点打磨“匠师”级人才！凭实干创实绩!五冶人愿与您携手共同实现伟大中国梦！

留言咨询

感谢您访问河南五冶机械制造有限公司网站，如果您对我们的“电工用圆铝杆连铸连轧生产线 Round aluminum rod continuous casting and rolling production line for electrical purposes”感兴趣，或者在“电工用圆铝杆连铸连轧生产线 Round aluminum rod continuous casting and rolling production line for electrical purposes”的使用过程中有什么问题和建议，可以拨打我们的客服电话：13938265594， 当然您也可以在下面给我们留言，我们将在更快时间处理您的反馈意见! 恭祝各位朋友满眼星辰璀璨无边，以梦为马不负韶华！！

联系我们

地址：河南省焦作市温县谷黄路

服务热线：13938265594

手机：13938265594

邮箱：137545002@qq.com