启停式飞剪：

       圆盘飞剪是由成对的圆盘刀片组成，这种飞剪一般用在小型车间，将它安装在冷床前对长轧件进行粗剪，使进入冷床的轧件不致太长。或者将它安装在精轧机组前对轧件进行切头，以保证精轧机组的轧制过程顺利进行。

       圆盘式飞剪所以能横向剪切运动着的轧件，主要是由于刀盘轴线与轧件运动方向倾斜一定角度，并且使圆盘刀片圆周速度在轧件运动方向上的分速度与轧件运动速度相等。轧件进入和离开圆盘刀片是通过诱导板实现的。圆盘式飞剪的缺点是剪切断面是倾斜的，但对于切头或在冷床前粗剪轧件影响不大。由于这种飞剪工作可靠，结构简单，并可应于轧制速度达10米/秒以上的场合，因而在小型车间得到了较广泛的应用。这种飞剪除了采用连续工作制外，也可采用启动工作制。

Start-stop flying scissors:

       Disc flying shears can transverse shear moving rolling parts, mainly because the axis of the cutter head and rolling parts of the direction of the tilt Angle, and make the circular speed of the disc blade in the direction of rolling parts of the motion of the partial speed and rolling parts of the speed. Rolling into and out of the disc blade is achieved by the induction plate. The disadvantage of disc shear is that the shear section is inclined, but it has little effect on the cutting head or rough cutting in front of the cold bed. Because this kind of flying shear is reliable, simple in structure, and can be used in the rolling speed of more than 10 m/s, so it has been widely used in small workshops. This kind of flying cut off the use of continuous working system, but also can be used to start working system.Disc flying shears:
       Disc flying shear is composed of a pair of disc blades. This kind of flying shear is generally used in small workshops. It is installed in front of the cold bed for rough cutting of long rolled pieces, so that the rolled pieces entering the cold bed are not too long. Or it can be installed in front of the finishing mill group to cut the rolled parts to ensure the smooth rolling process of the finishing mill group.

     踏实做产品，用心树品牌，长远赢未来！在设备智造业进入到智能化的今天，工匠精神并不过时，它的本质是自发专心致志地做事。兢兢业业、心无旁骛，河南五冶机械制造有限公司多年来坚守在机械领域，在飞剪 Flying scissors等产品上一点点打磨“匠师”级人才！匠工精神永传承，中国智造通世界！五冶人愿与您携手共同实现伟大中国梦！

留言咨询

感谢您访问河南五冶机械制造有限公司网站，如果您对我们的“飞剪 Flying scissors”感兴趣，或者在“飞剪 Flying scissors”的使用过程中有什么问题和建议，可以拨打我们的客服电话：13938265594， 当然您也可以在下面给我们留言，我们将在更快时间处理您的反馈意见!

联系五冶

地址：河南省焦作市温县谷黄路

服务热线：13938265594

手机：13938265594

邮箱：137545002@qq.com