都匀市钢材轧制设备诚信合作厂家五冶机械都匀市互联网推广站点更多的都匀市地域小知识:都匀地区生活着彝族、白族、傣族、壮族、苗族、回族、傈僳族、拉祜族、佤族、纳西族、瑶族、藏族、景颇族、布朗族、布依族、阿昌族、哈尼族、锡伯族、普米族、蒙古族、怒族、基诺族、德昂族、水族、满族、独龙族、仡佬族以及待识别民族“绕家人”等33个民族,少数民族占全州人口的68.5%。截至2012年,都匀市拥有各种矿床、矿点、矿化点80余处。其中,都匀市的铅锌矿探明储量为36万吨;煤储量2705.7万吨;铁矿石储量655万吨;重晶石储量536万吨;白云岩矿床化肥原料储量超亿吨。此外,都匀市的磷矿石、硫矿石、萤石、石灰石、石英砂等矿产资源储量也较为丰富。2018年,都匀市规模以上工业总产值415377万元,比上年下降29.9%;规模以上工业增加值比上年增长10.5%。.钢材轧制设备供应公司五冶机械地处祖国中原腹地,米字形交通网络连接祖国东南西北各地,高速、高铁、航空可快速到达都匀市,五冶机械针对都匀市钢材轧制设备客户有指定的服务团队,可为都匀市钢材轧制设备客户提供放心可靠的钢材轧制设备U型钢轧制解决方案!
本站关键词:都匀市轧钢机设备,都匀市连铸机,都匀市连轧机,都匀市棒材生产线,都匀市线材生产线,都匀市热轧机
您当前所在的位置:首页>配套辅机>都匀市飞剪 Flying scissors

      都匀市飞剪 Flying scissors

      圆盘飞剪是由成对的圆盘刀片组成,这种飞剪一般用在小型车间,将它安装在冷床前对长轧件进行粗剪,使进入冷床的轧件不致太长。或者将它安装在精轧机组前对轧件进行切头,以保证精轧机组的轧制过程顺利进行。 Disc flying shear is composed of a pair of disc blades. This kind of flying shear is generally used in small workshops. It is installed in front of the cold bed for rough cutting of long rolled pieces, so that the rolled pieces entering the cold bed are not too long. Or it can be installed in front of the finishing mill group to cut the rolled parts to ensure the smooth rolling process of the finishing mill group.
      咨询热线
      点击索取报价

          尊敬的【飞剪 Flying scissors】客户,您好!学史透悟,培根铸魂;强化思想引领,共筑崛起之路!五冶自成立以来,不驰于空想,不骛于虚声,实干兴邦,致力于机械领域技术研发和经验积累,已经累计为上百位客户提供过持续创新的【飞剪 Flying scissors】产品!

      启停式飞剪:

      型号: 3#-CA
      剪切方式: 回转式
      倍尺长度: ≥15m
      箱体: 焊接箱体
      工作制度: 启-停工作制
      剪切速度: 2~8m/s
      剪切精度: ±20mm
      轧件材质: 普碳钢、低合金钢
      剪切温度: ≥850℃
      碎断长度: ≤1000mm
      切头、切尾长度: 50~300mm
      *剪切力: 120KN
      *剪切面积: 1000mm2
      最短剪切周期: 2s
      剪刃宽度: 200mm
      电机型号: ZFQZ-315/21
      电机功率: 150KW
      功能: 切头、切尾、事故碎断、倍尺分断
      控制设备: 控制柜800×1000×2200  2面
      检测设备: 热金属检器:HMD8-4CD1  1台
      码盘:EL1024   1台
      码盘:EL0360   1台
      接近开关:Ni15-S30   1只
      圆盘式飞剪:

             圆盘飞剪是由成对的圆盘刀片组成,这种飞剪一般用在小型车间,将它安装在冷床前对长轧件进行粗剪,使进入冷床的轧件不致太长。或者将它安装在精轧机组前对轧件进行切头,以保证精轧机组的轧制过程顺利进行。

             圆盘式飞剪所以能横向剪切运动着的轧件,主要是由于刀盘轴线与轧件运动方向倾斜一定角度,并且使圆盘刀片圆周速度在轧件运动方向上的分速度与轧件运动速度相等。轧件进入和离开圆盘刀片是通过诱导板实现的。圆盘式飞剪的缺点是剪切断面是倾斜的,但对于切头或在冷床前粗剪轧件影响不大。由于这种飞剪工作可靠,结构简单,并可应于轧制速度达10米/秒以上的场合,因而在小型车间得到了较广泛的应用。这种飞剪除了采用连续工作制外,也可采用启动工作制。

      Start-stop flying scissors:

      Model number: 3#-CA
      Shear mode: Rotary type
      Double ruler length: 15 m or more
      Box: Welded casing
      Working system: Start-stop system
      Shear rate: 2~8m/s
      Shear accuracy: Plus or minus 20 mm
      Rolling material: Common carbon steel, low alloy steel
      Shear temperature: 850 ℃ or higher
      Breaking length: 1000 mm or less
      Length of cutting head and tail: 50~300mm
      Maximum shear force: 120KN
      Maximum shear area: 1000mm2
      Minimum shear period: 2s
      Cutting edge width: 200mm
      Motor model: ZFQZ-315/21
      Motor power: 150KW
      Function: Head cutting, tail cutting, accident breaking, double scale breaking
      Control equipment: Control cabinet 800 x 1000 x 2200 2 sides
      Testing equipment: Hot metal detector: HMD8-4CD1 1 PCS
      Code disk: EL1024 1 PCS
      Code disk: EL0360 1 PC
      Proximity switch: Ni15-S30 1 piece


             Disc flying shears can transverse shear moving rolling parts, mainly because the axis of the cutter head and rolling parts of the direction of the tilt Angle, and make the circular speed of the disc blade in the direction of rolling parts of the motion of the partial speed and rolling parts of the speed. Rolling into and out of the disc blade is achieved by the induction plate. The disadvantage of disc shear is that the shear section is inclined, but it has little effect on the cutting head or rough cutting in front of the cold bed. Because this kind of flying shear is reliable, simple in structure, and can be used in the rolling speed of more than 10 m/s, so it has been widely used in small workshops. This kind of flying cut off the use of continuous working system, but also can be used to start working system.Disc flying shears:
             Disc flying shear is composed of a pair of disc blades. This kind of flying shear is generally used in small workshops. It is installed in front of the cold bed for rough cutting of long rolled pieces, so that the rolled pieces entering the cold bed are not too long. Or it can be installed in front of the finishing mill group to cut the rolled parts to ensure the smooth rolling process of the finishing mill group.

       

         废话少说,实事多干!再多的说辞和包装策划都比不过踏实点在产品上钻研探讨!五冶人以日积月累的点滴行动沉淀【飞剪 Flying scissors】的品牌价值!相识是缘,合作是份,相信各位有缘人一定能找到理想的合作伙伴!党建凝聚智慧,匠心打造卓越,企业迈向新征程!

       

        【品质铸就五冶】

       

      更好的小型轧钢机、冷轧机、

       

      加热炉、高速棒材生产线、

       

      配套辅机、连铸机生产厂家

       

      选择五冶机械制造就是选择了品质!
       

       

       

      网站首页         关于我们         产品展示         行业动态         行业知识         生产现场         工程案例         联系我们
      公司主要产品:实验轧机、摩根高速轧机、分切机、中频加热炉、连铸机、液压剪
      版权所有:河南五冶机械制造有限公司        备案号:豫ICP备2021001253号-1     
       

      电话:13938265594    18838087886     

      邮箱:137545002@qq.com   地址:河南省焦作市温县谷黄路(河南省恒信机械产业园区)   管理入口

       手机版